TM Conveyor Tracking
Software version: TMflow 1.76
32
4
Start a Vision Job
•
Once the settings in Start Node
are completed, click the
of
Vision Node and then Vision Job
to proceed.
Figure 35 Vision Job
5
Input Vision Job Name
•
Under the Vision Job page, click
and input the vision task
name. Then click OK to start new
vision task.
Figure 36 Add new vision job
Figure 37 Input vision job name
6
Enable Conveyor Tracking Camera
•
Upon entering vision task screen,
choose Conveyor Tracking
camera on the Camera List at the
left side (the example screen is a
“calibrated” example)
Figure 38 Conveyor Tracking camera
7
Go to “Calibration”
“Automatic”.