Omron SYSMAC-SE2, Practices Manual

Page: 43 / 54

CJ-series Units (Excluding I/O Interface Units)

PLC Box
Set the PLC box as follows.
ID Property name Setting value
20416 PLC type designation Model name of the CJ-series Unit
Example: "CJ1W-AD042"
20427 Rack ID Blank
20167 CPU Not selected.
20164 Bus coupler / head station Not selected.
I/O Interface Unit CJ1W-II101

PLC Box
Set the PLC box as follows.
ID Property name Setting value
20416 PLC type designation CJ1W-II101
20167 CPU Not selected.
20164 Bus coupler / head station Selected.
3-2-5
Device Variables
Set the component data for models that support the connector function for device variables as follows.

PLC Connection Points (I/O Ports)
Set the PLC connection points according to the instructions of the following IEC 62714
AutomationML I/O Device Port Map Information .
Name Reference File storage location
IEC 62714 AutomationML
I/O Device Port Map Infor-
mation AmlIODevicePortMa-
pInformation.html Help folder under the installation folder of the Sysmac
Studio
Default location
C:\Program Files\OMRON\Sysmac Studio\Help
3 Setting EPLAN Electric P8
3-7
Sysmac Studio Electrical CAD Connector Function Practices Guide for AutomationML Import (EPLAN Electric P8) (P156)
3-2
Setting Component Data
3
3-2-5
Device V
ariables