manualshive.com logo in svg

Omron Sysmac NY512-1300, User Manual

Share
Download
Omron Sysmac NY512-1300 User Manual Download Page 68

3   System-defined Variables Related to the Built-in EtherNet/IP Port

3-6

NY-series Industrial Panel PC / Industrial Box PC Built-in EtherNet/IP Port User’s Manual (W563)

_EIP1_IPAdrCfgErr

Port1 IP Address Set-
ting Error

Indicates the IP address setting errors for 
the communications port 1.
TRUE: 

•

There is an illegal IP address 
setting.

•

A read operation failed.

•

The IP address obtained from 
the BOOTP server is incon-
sistent.

FALSE: Normal

BOOL

TRUE or 
FALSE

page 3-17

_EIPIn1_IPAdrCfgErr

Internal Port1 IP 
Address Setting Error

Indicates the IP address setting errors for 
the internal port 1.
TRUE: 

•

There is an illegal IP address 
setting.

•

A read operation failed.

•

The IP address obtained from 
the BOOTP server is incon-
sistent.

FALSE: Normal

BOOL

TRUE or 
FALSE

page 3-17

_EIP_IPAdrDupErr

IP Address Duplica-
tion Error

NY-series Controller: Indicates that the 
same IP address is assigned to more than 
one node for the communications port 1.
TRUE: Duplication occurred.
FALSE: Other than the above.

BOOL

TRUE or 
FALSE

page 3-17

_EIP1_IPAdrDupErr

Port1 IP Address 
Duplication Error

Indicates that the same IP address is 
assigned to more than one node for the 
communications port 1.
TRUE: Duplication occurred.
FALSE: Other than the above.

BOOL

TRUE or 
FALSE

page 3-18

_EIPIn1_IPAdrDupErr Internal Port1 IP 

Address Duplication 
Error

Indicates that the same IP address is 
assigned to more than one node for the 
internal port 1.
TRUE: Duplication occurred.
FALSE: Other than the above.

BOOL

TRUE or 
FALSE

page 3-18

_EIP_DNSCfgErr

DNS Setting Error

Indicates that the DNS or hosts settings 
are incorrect. Or, a read operation failed.
TRUE: Setting incorrect or read failed
FALSE: Normal

BOOL

TRUE or 
FALSE

page 3-18

_EIP_BootpErr

BOOTP Server Error

NY-series Controller: Indicates that a 
BOOTP server connection failure 
occurred on the communications port 1.
TRUE: There was a failure to connect to 

the BOOTP server (timeout).

FALSE: The BOOTP is not enabled, or 

BOOTP is enabled and an IP 
address was normally obtained 
from the BOOTP server.

BOOL

TRUE or 
FALSE

page 3-18

_EIP1_BootpErr

Port1 BOOTP Server 
Error

Indicates that a BOOTP server connection 
failure occurred on the communications 
port 1.
TRUE: There was a failure to connect to 

the BOOTP server (timeout).

FALSE: The BOOTP is not enabled, or 

BOOTP is enabled and an IP 
address was normally obtained 
from the BOOTP server.

BOOL

TRUE or 
FALSE

page 3-18

Variable name

Meaning

Function

Data type

Range of 

values

Reference

Summary of Contents for Sysmac NY512-1300













































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands