![background image](http://html.mh-extra.com/html/omron/sysmac-ny512-1300/sysmac-ny512-1300_user-manual_742451061.webp)
2-11
2 Installing Ethernet Networks
NY-series Industrial Panel PC / Industrial Box PC Built-in EtherNet/IP Port User’s Manual (W563)
2-3 C
onn
ectin
g t
o
t
h
e Net
w
ork
2
2-
3-2 C
onnecting
the Cable
Precautions for Correct Use
Precautions for Correct Use
•
Turn OFF the Controller's power supply before connecting or disconnecting Ethernet commu-
nications cable.
•
Allow extra space for the bending radius of the communications cable. For the CPU Unit
dimensions when the communications cable is connected to the Unit, refer to the
NY-series
Industrial Box PC Hardware User’s Manual
(Cat. No. W556) or
NY-series Industrial Panel PC
Hardware User’s Manual
(Cat. No. W557). The required space depends on the communica-
tions cable and connector that are used. Consult the manufacturer or sales agent.
1
Lay the twisted-pair cable.
2
Connect the cable to the Ethernet switch.
3
Connect the twisted-pair cable to the connector on the built-in EtherNet/IP port. Be sure to press the
connectors (both the Ethernet switch side and Ethernet side) until they lock into place.
2-3-2
Connecting the Cable
Summary of Contents for Sysmac NY512-1300
Page 459: ......