Appendices
A-48
NY-series Industrial Panel PC / Industrial Box PC Built-in EtherNet/IP Port User’s Manual (W563)
A-4
Precautions for Using the Network
Configurator on Windows XP,
Windows Vista, or Windows 7 or
Higher
Better firewall security for Windows XP (SP2 or higher), Windows Vista, and Windows 7 higher has
increased the restrictions for data communications. Therefore, you must perform the corresponding
procedure given below to change the settings of the Windows firewall before you use the following
operations to perform communications with the Network Configurator connected to an NY-series
Controller.
•
If you select
Option - Select Interface - Ethernet I/F
•
If you select
Option - Select Interface - NJ/NX/NY Series Ethernet Direct I/F
Precautions for Correct Use
Precautions for Correct Use
The main function of the firewall is to prevent unwanted access from external sources (e.g., the
Internet). The changes that are made with the following procedures are to allow the Network
Configurator and the NY-series Controller to connect. If your computer is on an inhouse network,
make sure that security will not be jeopardized before you change the settings.
1
When you attempt to connect to the NY-series Controller from the Network Configurator, the
Windows Security Warning Dialog Box is displayed.
2
Click the
Unblock
Button.
An EtherNet/IP connection will be approved for the Network Configurator, and you will be able to
connect the Network Configurator in the future.
Use the following procedure to change the settings. Always perform steps 1 to 6 if you cannot go
online. The User Account Control Dialog Box may be displayed during this procedure. If it appears,
click the
Continue
Button and continue with the procedure.
1
Select
Control Panel
from the Windows Start Menu and change the display to Classic View.
A-4-1
Changing Windows Firewall Settings
Windows XP
Windows Vista/Windows 7 or Higher
Summary of Contents for Sysmac NY512-1300
Page 459: ......
