manualshive.com logo in svg

Omron Sysmac NY512-1300, User Manual

Share
Download
Omron Sysmac NY512-1300 User Manual Download Page 383

14-9

14   Checking Communications Status of Network and Troubleshooting

NY-series Industrial Panel PC / Industrial Box PC Built-in EtherNet/IP Port User’s Manual (W563)

14-
2 Connection S

tatus Codes and T

roubleshootin

g 

14

14-2 Connection Status Codes and 

Troubleshooting

This section explains how to identify and correct errors based on the tag data link’s connection status.
The connection status can be read using the Connection Tab Page of the Network Configurator’s Mon-
itor Device Window. Refer to 

14-1 Device Monitoring on the Network Configurator

 for details.

Additional Information

The connection status has the same meaning as the Connection Manager’s General and Addi-
tional error response codes, as defined in the CIP specifications.

The following table shows the likely causes of the errors causes for each configuration and connection
status (code).

Originator

Target

Configuration 1

CS1W-EIP21, CJ1W-EIP21, CJ2H-CPU



-

EIP, CJ2M-CPU3

, NJ501-



, NJ301-



, NJ101-



, and NX701-



, NY5

2-



CS1W-EIP21, CJ1W-EIP21, CJ2H-
CPU



-EIP, CJ2M-CPU3

, NJ501-



, NJ301-



, NJ101-



, 

and NX701-



, NY5

2-



Configuration 2

CS1W-EIP21, CJ1W-EIP21, CJ2H-CPU



-

EIP, CJ2M-CPU3

, NJ501-



, NJ301-



, NJ101-



, and NX701-



, NY5

2-



Products from other manufacturers

Configuration 3

Products from other manufacturers

CS1W-EIP21, CJ1W-EIP21, CJ2H-
CPU



-EIP, CJ2M-CPU3

, NJ501-



, NJ301-



, NJ101-



, 

and NX701-



, NY5

2-



Connection status

Source of error

Handling

General 

Status 

(hex)

Additional 

Status 

(hex)

Configuration 1

Configuration 2

Configuration 3

00

0000

Normal status code:
The connection has been opened 
and the tag data link is communicat-
ing normally.

---

---

---

01

0100

Error code returned from target:
Attempted to open multiple connec-
tions for the same connection.

This error does not 
occur.

Depends on the tar-
get’s specifications. 
(This error should not 
occur. If is does, con-
tact the target device’s 
manufacturer.)

Depends on the origi-
nator’s specifications. 
(This error should not 
occur. If is does, con-
tact the originator 
device’s manufacturer.)

01

0103

Error code returned from target:
Attempted to open a connection with 
an unsupported transport class.

This error does not 
occur.

Confirm that the target 
supports Class 1.

Confirm that the origi-
nator supports Class 1.

01

0106

Duplicate consumers:
Attempted to open multiple connec-
tions for single-consumer data.

If the tag data link is 
stopped or started, 
this error may occur 
according to the tim-
ing, but the system 
will recover automat-
ically.

Depends on the tar-
get’s specifications. 
(Contact the target 
device’s manufacturer.)

If the tag data link is 
stopped or started, this 
error may occur 
according to the tim-
ing, but the system will 
recover automatically.

01

0107

Error code returned from target:
Attempted to close a connection, but 
that connection was already closed.

This error does not 
occur.

This error does not 
occur.

This is not an error 
because the connec-
tion is already closed.

Summary of Contents for Sysmac NY512-1300













































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands