10 FTP Server
10-4
NY-series Industrial Panel PC / Industrial Box PC Built-in EtherNet/IP Port User’s Manual (W563)
10-2 FTP Server Function Details
The file system in the Controller that can be accessed by the built-in EtherNet/IP port includes files in
any Virtual SD Memory Card in the NY-series Controller. The directory tree is shown below.
A connection is initially made to the root directory.
Additional Information
•
The date of the MEMCARD1 directory displayed for
ls,
dir,
or
mkdir
commands in the root
directory is the date of the file system volume label.
•
The login date is displayed for MEMCARD1 if a volume label has not been created.
Input the FTP login name and password to login to the built-in EtherNet/IP port from an FTP client appli-
cation. Use the Built-in EtherNet/IP Port Settings in the Sysmac Studio to set the FTP login name and
password.
Additional Information
When a general-purpose FTP application is used, you can use a graphical user interface similar
to Explorer to transfer and read files.
Login Name and Password Setting
The FTP login name and password are not set by default. Use the Built-in EtherNet/IP Port Settings
to set any login name and password.
Login Messages
10-2-1 Supported Files
10-2-2 Connecting to the FTP Server
Status
Message
Normal connection
220 xxx.xx.xx.xx FTP server ready.
xxx.xx.xx.xx: Controller model (example: NY512-1500-131513F10)
Connected to maximum num-
ber of connections (6)
530 FTP server busy, Goodbye.
/:
root
MEMCARD1: SD
usr
bin
Used by system
dev
Summary of Contents for Sysmac NY512-1300
Page 459: ......
