manualshive.com logo in svg

Omron SYSMAC NY Series, Hardware User Manual

Share
Download
Omron SYSMAC NY Series Hardware User Manual Download Page 200

A-1 BIOS

This section provides the BIOS information of the Industrial Box PC.

WARNING

Changing BIOS information is only allowed for the engineer in charge
that possesses a thorough understanding of the BIOS settings because
it can change the behavior of the product.

A-1-1

BIOS Overview

The BIOS contains settings that influence the behavior of the Industrial Box PC.
The touchscreen functionality is not functional when working in BIOS.
Ensure a USB keyboard is connected.

BIOS Setup Program

Press the 

DEL

 or 

F2

 key repeatedly directly after Power ON to access the BIOS Setup Program.

Boot Selection Popup Menu

Press the 

F11

 key repeatedly directly after Power ON to display the Boot Selection Popup menu.

The popup menu allows selection of the boot device and the option to enter the BIOS setup program.

BIOS Structure

The BIOS contains a menu bar, a left frame and a right frame.
The left frame displays all the options that can be configured in the selected menu.
The left frame uses following colors:
• Blue = Configurable options
• Greyed-out = Not configurable
• Inverse white = Selected
The right frame displays the key legend. Above the key legend is an area reserved for text messages.
These text messages explain the options and the possible impacts when you change the selected op-
tion in the left frame.

Use the 

àß

 keys to navigate between pages.

The menu bar gives access to following pages:
•

Main

•

Advanced

•

Chipset

•

Security

•

Boot

•

Save & Exit

Appendices

A-2

NY-series Industrial Box PC Hardware User's Manual (W553)

Summary of Contents for SYSMAC NY Series





































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands