manualshive.com logo in svg

Omron SYSMAC NY Series, Hardware User Manual

Share
Download
Omron SYSMAC NY Series Hardware User Manual Download Page 158

5-6-2

Windows Startup First Time

Use the following procedure for the first time startup of Windows on your Box PC.

Additional Information

Do not power OFF the Box PC during this procedure!
At the end of this procedure an automatic restart will result in the Windows home screen.

1

Ensure an input device is present.
• For an Industrial Box PC connect a keyboard and mouse or a touch monitor.
• For an Industrial Panel PC touch functionality is available. A keyboard and mouse are not

required.

2

Follow the windows installation procedure.

Pay special attention to the following steps:
• Language

Select the preferred language in the Language Selection Window
Select the language carefully, the selected system language can not be changed.

• Legal stuff like license agreements

• Windows 10: Select 

Accept

 to accept the combined Windows and OMRON license agree-

ments.

• Windows 7: Select 

Accept

 separately for Windows and for the OMRON utilities.

• Settings

• Windows 10: Select 

Customize

 instead of 

Use Express settings

.

Set the settings according to your application environment.

• Windows 7: Select 

Use recommended settings

.

• Create a user account and password and enter the 

password hint

WARNING

Security setting adjustments should only be performed by the engineer
in charge that possesses a thorough understanding of the security set-
tings. Selecting non-recommended security settings can put your sys-
tem at risk.

Precautions for Safe Use

• Choose an OS password that is not obvious to prevent unauthorized access.
• Remember the OS user name and password. The product is inaccessible without it.

The Box PC will automatically restart.
A black screen will be visible for a few seconds and then the Box PC will boot to the Windows
start screen.

3

Login

4

Adjust the backlight, Logo LED, and Status LED brightness of the connected monitor(s) to your
settings.

5 Installation

5-44

NY-series Industrial Box PC Hardware User's Manual (W553)

Summary of Contents for SYSMAC NY Series





































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands