Omron SYSMAC NY Series, Hardware User Manual

Page: 129 / 260

5-3-2
Product Orientation
The Box PC can be mounted in a book
A
or wall
B C
orientation.
• For book mount there is one allowed orientation
A
.
• For wall mount there are two allowed orientations, horizontally mounted
B
and vertically mounted
C
.
Do not install the Box PC in other orientations.
A C
Book mount
Frontview Sideview
Wall mount
Frontview
Horizontal
Frontview
Vertical
Sideview
B
5-3-3 Temperature
The temperature inside a control panel may be at least 10 to 15°C higher than outside the panel. Im-
plement the following measures against overheating at the installation site and in the control panel,
and allow a sufficient margin for the temperature.
Distance for Cooling
Adequate airflow around the Industrial Box PC is required.
Additional Information
• The ambient temperature must be within the operating range.
Refer to 4-4-1 Operation Environment Specifications on page 4-31 for temperature specifica-
tions.
• Allow space to accommodate for the bending radius of the cables.
Refer to:
•
3-10-6 DVI Cables on page 3-26
• 3-10-7 USB Type-A to USB Type-B Cables on page 3-26
•
for cable bending requirements.
5 Installation
5-15
NY-series Industrial Box PC Hardware User's Manual (W553)
5-3 Mount
5
5-3-2
Product Orientation