Omron Sysmac NX1P2-10 1 Series, User Manual

Page: 62 / 578

1-5 EtherNet/IP Communications Proce-
dures

Basic Operation
1
Wire the Ethernet network with twisted-pair cable. Section 2 Installing Ethernet Net-
works
on page 2-1
↓
2
Set the built-in EtherNet/IP port IP address with the Sysmac
Studio. Section 4 Determining IP Ad-
dresses
on page 4-1
1. Use the Sysmac Studio to create a new project.
2. Set the local IP address in one of the following ways:
•
Defaults:
NX701 CPU Unit
Built-in EtherNet/IP port 1 : 192.168.250.1
(subnet mask = 255.255.255.0)
Built-in EtherNet/IP port 2 : 192.168.251.1
(subnet mask = 255.255.255.0)
NX102 CPU Unit
Built-in EtherNet/IP port 1 : 192.168.250.1
(subnet mask = 255.255.255.0)
Built-in EtherNet/IP port 2 : 192.168.251.1
(subnet mask = 255.255.255.0)
NX1P2 CPU Unit Built-in EtherNet/IP port : 192.168.250.1
(subnet mask = 255.255.255.0)
NJ-series CPU Unit Built-in EtherNet/IP port
•
Set any IP address.
•
Obtain from the BOOTP server.
↓
3
Perform a communications test with a PING command from a
computer. Section 6 Testing Communica-
tions
on page 6-1
↓
4
Use the Sysmac Studio to set the initial settings of the Ether-
Net/IP Function Module. Section 5 Sysmac Studio Set-
tings for the Built-in EtherNet/IP
Port
on page 5-1
•
Set the TCP/IP settings and Ethernet settings as required.

Using Tag Data Links
1
Import the variable settings for the tags that were created on
the Sysmac Studio to the Network Configurator. 7-2-4 Creating Tags and Tag Sets
on page 7-23
↓
2
Use the Network Configurator to create the tag data link table. Section 7 Tag Data Link Func-
tions
on page 7-1
•
Create the network configuration.
•
Set the tags, tag sets, and connections.
↓
3
Connect the Network Configurator online.
↓
4
Download the tag data link setting.
↓
1 Introduction
1-28
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User’s Manual (W506)