Omron Sysmac NX1P2-10 1 Series, User Manual

Page: 493 / 578


Connection Tab Page
Information about the target node that acts as the originator is displayed.
If all tag data link connections to the node are established and normal, this information is displayed
in blue. However, if any connection is broken it is displayed in red.
However, this information is displayed in gray if the connection to the node is stopped.
In addition, in the Connection Status Area, the
Status Column shows the current status of each
connection that is set as the originator. This information can be used to identify the cause of tag
data link errors.
Refer to
16-2-2 Connection Status Codes and Troubleshooting on page 16-11 for details on the
connection status.
16 Troubleshooting
16-7
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User’s Manual (W506)
16-2
Checking Status with the Network Configurator
16
16-2-1 The Network Configurator's Device Monitor Function