Omron Sysmac NX1P2-10 1 Series, User Manual

Page: 346 / 578

CIP
status
Meaning
Add
status
Cause
11 REPLY_DATA_TOO_LARGE --- The response exceeds the maximum re-
sponse length.
13 NOT_ENOUGH_DATA --- The data length was too short for the
specified service.
15 TOO_MUCH_DATA --- The data length was too long for the
specified service.
1F VENDOR_SPECIFIC_ERROR 0102,2104 An attempt was made to read an I/O var-
iable that cannot be read.
0104,1103 The specified address and size exceed a
segment boundary.
8001 An internal error occurred.
8007 An inaccessible variable was specified.
8031 An internal error occurred. (A memory al-
location error occurred.)
20 INVALID_PARAMETER 8009 A segment type error occurred.
800F There is an inconsistency in data length
information in the request data
8017 More than one element was specified for
a variable that does not have elements.
8018 Zero elements or data that exceeded the
range of the array was specified for an
array.
8023 An internal error occurred. (An illegal
command format was used.)
8024 An internal error occurred. (An illegal
command length was used.)
8025 An internal error occurred. (An illegal pa-
rameter was used.)
8027 An internal error occurred. (A parameter
error occurred.)
8028
•
An attempt was made to write an out-
of-range value for a variable for which
a subrange is specified.
•
An attempt was made to write an un-
defined value to an enumeration varia-
ble.
8-6-2
Write Service for Variables
Specify service code 4D hex to write the value of the variable that is specified by the request path.
8 CIP Message Communications
8-84
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User’s Manual (W506)