Omron Sysmac NX-TBX01, User Manual

Page: 28 / 172

Related Manuals
26 NX-series System Units User’s Manual (W523)
Related Manuals
The following table shows related manuals. Use these manuals for reference.
Manual name Cat. No. Model numbers Application Description
NX-series System Units
User’s Manual W523 NX-PD1

NX-PF0 
NX-PC0

NX-TBX01
Learning how to
use NX-series
System Units The hardware and functions of the
NX-series System Units are described.
NX-series Data Refer-
ence Manual W525 NX-

Referencing lists of
the data that is
required to config-
ure systems with
NX-series Units Lists of the power consumptions,
weights, and other NX Unit data that is
required to configure systems with
NX-series Units are provided.
Sysmac Studio Version
1 Operation Manual W504 SYSMAC-
SE2

Learning about the
operating proce-
dures and func-
tions of the
Sysmac Studio Describes the operating procedures of
the Sysmac Studio.
NX-IO Configurator
Operation Manual W585 CXONE-AL

D-V4
Learning about the
operating proce-
dures and func-
tions of the NX-IO
Configurator. Describes the operating procedures of
the NX-IO Configurator.
NJ/NX-series Trouble-
shooting Manual W503 NX701- 
NJ501-

NJ301- 
NJ101-

NX1P2- 
Learning about the
errors that may be
detected in an
NJ/NX-series Con-
troller Concepts on managing errors that may
be detected in an NJ/NX-series Con-
troller and information on individual
errors are described.
NY-series Troubleshoot-
ing Manual W564 NY532-

NY512- 
Learning about the
errors that may be
detected in an
NY-series Indus-
trial PC Concepts on managing errors that may
be detected in an NY-series Controller
and information on individual errors are
described.
NX-series NX1P2 CPU
Unit Hardware User’s
Manual W578 NX1P2-  Learning the basic
specifications of
the NX-series
NX1P2 CPU Units,
including introduc-
tory information,
designing, installa-
tion, and mainte-
nance. Mainly
hardware informa-
tion is provided.
An introduction to the entire NX1P2
CPU Unit system is provided along with
the following information on the CPU
Unit.
• Features and system configuration
• Overview
• Part names and functions
• General specifications
• Installation and wiring
• Maintenance and Inspection
NX-series EtherCAT

Coupler Unit User’s
Manual
W519 NX-ECC20

Learning how to
use an NX-series
EtherCAT Coupler
Unit and Ether-
CAT Slave Termi-
nals The following items are described: the
overall system and configuration meth-
ods of an EtherCAT Slave Terminal
(which consists of an NX-series Ether-
CAT Coupler Unit and NX Units), and
information on hardware, setup, and
functions to set up, control, and monitor
NX Units through EtherCAT.