manualshive.com logo in svg

Omron Sysmac NX-series, User Manual, Page: 298 / 306

Share
Download
Omron Sysmac NX-series User Manual Download Page 298

A-10-2 Slave Terminal

This section describes how to display the Support Software User Calibration Window for a High-speed
Analog Input Unit connected to the Communications Coupler Unit.

1

In the Multiview Explorer, double-click the Communications Coupler Unit to which the target
High-speed Analog Input Unit is connected to open the Edit Slave Terminal Configuration Tab
Page.
The following tab page is displayed.

2

Go online, right-click the High-speed Analog Input Unit on the Edit Slave Terminal Configura-
tion Tab Page, and select 

User Calibration

 from the menu.

Appendices

A - 60

NX-series Analog I/O Units User’s Manual for High-speed Analog Input Units (W592)

Summary of Contents for Sysmac NX-series



















































































































































































































































































































Reviews:

No comments