Omron SYSMAC CX-Programmer 8.1, Operation Manual

Page: 95 / 154

Editing the SFC Chart Section 3-2
79
A convergence and a subsequent step will be added.
2 Right-click the created convergence, and select Connections - Add Connection
from the pop-up menu.
The Add Connection dialog will be displayed.
3 Confirm that the transitions to be joined are selected in the Add Connection dialog,
and click OK .
The selected transitions will be joined to the convergence.
Note 1: You can also right-click the convergence, select Connections - Add Connection to
Convergence from the pop-up menu, and drag the lead line to the target transition to
connect transitions to a convergence.
2: Right-click the line next to a conditional branch and select Use Default Transition
Precedence to numerically display the execution order starting from 1. Then
double-click the numbers to change the execution order as desired.
3-2-8 Creating a Simultaneous Sequence Divergence/Convergence
Creating a Simultaneous Sequence Divergence
Adding 2 Steps
A simultaneous sequence divergence can be added after a transition.
1 Right-click a transition, and select Add Simultaneous Sequence Divergence
from the pop-up menu.