Omron SYSMAC CX-Programmer 8.1, Operation Manual

Page: 105 / 154

Searching and Replacing within an SFC Chart Section 3-3
89
option as necessary.
3 Click Find Next , then click Replace after confirming the text to be replaced.
To replace all instances, click Replace All .
3-3-3 Cross-Reference Report
A list of addresses used by the program can be displayed.
You can also confirm which address corresponds to which SFC element of the SFC
chart.
Note: For details on cross-reference reporting function, refer to the CX-Programmer Operation
Manual (Cat. No. W446).
1 Select
Cross-Reference Report from the View menu.
The Cross-Reference Report window will be displayed.
2 Using the Report type combo box and Memory Area combo box, set the
requirements for the report
3 Click Generate.
3-3-4 Address Reference Tool
The Address Reference Tool can display SFC elements and variables, which are using
the same address as the selected SFC element or same variable of an SFC chart.
Note: For details on the address reference tool, refer to the CX-Programmer Operation Manual
(Cat. No. W446).
1 Select Windows - Address Reference Tool from the View menu.
The Address Reference Tool window will be displayed.
2 Select an SFC element or a variable from an SFC chart.
The selected item address will be displayed in the Address field of the Address
Reference Tool window.
3 Click Find .