Omron SYSMAC CJ1W-EIP21, Operation Manuals

Page: 123 / 438

5-11
5 Sysmac Studio Settings for the EtherNet/IP Unit
CJ-series EtherNet/IP Units Operation Manual for NJ-series CPU Unit (W495)
5-7 SNMP T
rap
S
e
ttin
g
s D
ispla
y
5
5-7 SNMP Trap Settings Display

SNMP Trap
*1 The following ports are used by the system and cannot be set by the user: 53, 68, 123, 161, 2222, 9600, and
44818.
Additional Information
Refer to 11-1-1 Overview for details on the SNMP trap.
Setting Description Default
SNMP trap Specify whether to use the SNMP trap (network error detection).
If the SNMP trap service is not enabled, SNMP traps are not sent to the
SNMP manager.
Do not use.
Port No.
*1 Set the port number to use to connect to the SNMP server.
It is normally not necessary to change this setting.
0 (port No. 162)