31
Input-type Monitor (Display Level 2)
PV
SV
Input-type monitor parameter symbol
SW202 set value
Note Cannot be set.
Alarm 1 and Alarm 2 Modes (Display Level 2)
PV
SV
Alarm 1 Mode parameter symbol
Alarm 1 Mode of currently selected loop
PV
SV
Alarm 2 Mode parameter symbol
Alarm 2 Mode of currently selected loop
Select the desired alarm type from the following chart and set the number (X: set
value)
ALARM
mode
Alarm Type
Alarm Range
0
SP
0
No alarm
1
Upper- and lower-limit alarm
x
x
2
Upper-limit alarm
x
3
Lower-limit alarm
x
4
Upper- and lower-limit range alarm
x
x
5
Upper- and lower-limit alarm with
standby sequence
x
x
6
Upper-limit alarm with standby
sequence
x
7
Lower-limit alarm with standby
sequence
x
8
Absolute-value upper-limit alarm
x
9
Absolute-value lower-limit alarm
x
Standby Sequence
When the power is turned on, the value is below the set point, so alarm output
status occurs with regard to the lower limit alarm. In this situation, if “lower limit
Parameter Displays and Settings
