![background image](http://html1.mh-extra.com/html/omron/sx-f/sx-f_instruction-manual_743231076.webp)
68
The control panel
Section 9-2
Area A:
Shows the actual menu number (3 or 4 digits).
Area B
Shows if the menu is in the toggle loop or the
VSD is set for Local operation.
Area C:
Shows the heading of the active menu.
Area D:
Shows the status of the VSD (3 digits).
The following status indications are possible:
Acc: Acceleration
Dec: Deceleration
I
2
t : Active I
2
t protection
Run: Motor runs
Trp: Tripped
Stp: Motor is stopped
VL: Operating at Voltage limit
slp: Sleep mode
SL: Operating at Speed limit
CL: Operating at Current limit
TL: Operating at Torque limit
OT: Operating at Temperature Limit
LV: Operating at Low Voltage
Sby: Operating from Standby power supply
SST: Operating Safe Stop, is blinking when activated
LCL: Operating with low cooling liquid level
Area E:
Shows active parameter set and if it is a motor parameter.
Area F:
Shows the setting or selection in the active menu.
This area is empty at the 1st level and 2nd level
menu. This area also shows warnings and alarm
messages.
Fig. 52 Example 1st level menu
Fig. 53 Example 2nd level menu
Fig. 54 Example 3d level menu
Fig. 55 Example 4th level menu
A
A
M1:
400V
A
0.1s
A
Summary of Contents for SX-F
