I N T R O D U C T I O N
2
4
H-T40
M
-P Manual Rev.A
2 I
NTRODUC
T
ION
2
H-T40
M
-P is a status display touchscreen with a 3.3” STN Liquid
Crystal Display, and is water- and dust-resistant according to IP65/
NEMA 4X (indoor use only.)
H-T40
M
-P is CE-marked and is highly transient-resistant while
in operation.
Also, its compact design makes connections with other machinery more
flexible, thus achieving the optimal performance for machines.
3 S
AFETY
P
RECAUTIONS
3
Both the installer and the owner and/or operator of the status display
touchscreen must read and understand this installation manual.
3.1. G
ENERAL
— Only qualified personnel may install or operate the status display
touchscreen
— The status display touchscreen must be installed according to the
installation instructions.
— The status display touchscreen is designed for stationary installation on a
plane surface, where the following conditions are fulfilled:
• no high explosive risks
• no strong magnetic fields
• no direct sunlight
• no large, sudden temperature changes
• for use in Pollution Degree 2 Environment
• for use on the flat surface of Types 1 and 4X (indoor use only)
enclosures
— Never allow fluids, metal filings or wiring debris to enter any openings in
the status display touchscreen. This may cause fire or electrical shock.
— The status display touchscreen fulfills the requirements of EMC directive
2004/108/EC.
