![background image](http://html1.mh-extra.com/html/omron/sti-f3sj-b-p25-01ts-series/sti-f3sj-b-p25-01ts-series_user-manual_744017016.webp)
2
Chapter
1
Ba
sic Conf
igu
rat
io
n and Names
F3SJ-B
User’s Manual
Overview and Specifications
Basic Configuration and Names
This section describes the system configuration and part names of the F3SJ-B.
To distinguish between the emitter and receiver, find the labels attached to the front of the F3SJ-B. The label on the emitter
reads "EMITTER" and the label on the receiver reads "RECEIVER".
Component
Model
Description
Emitter, receiver
F3SJ-B
P25-
-01TS
Select a type name based on the required protective height.
The model name can be understood as follows:
1: Protective height (mm)
2: Output type (P for PNP output type *1)
3. Detection capability (mm)
4: L for emitter, D for receiver, blank for a set of emitter and receiver.
*1. A hyphen "-" is added instead of "P" for emitter.
Emitter
Receiver
Connection cable
(Black)
Indicator
Beam
Extension cable
Connection
cable (Gray)
Beam center-line mark
F3SJ-B
□□□□
P25-
□
-01TS
1
4
3
2
Summary of Contents for Sti F3SJ-B P25-01TS Series
