Omron Sti F3SJ-A Series, User Manual

Page: 191 / 230

171
F3SJ-A
User’s Manual
Ch
apt
e
r
5
Wir
ing
Ex
amples
Input/Output Circuit and Applications
E
„
Connecting 4 Muting Sensors
• Attaching a key cap for muting (F39-CN6) enables the muting function to be used
Attaching the key cap for muting (F39-CN6) p.36
Wiring When External Device Monitoring Function Is Not Required p.41
Using the setting tool enables the use of start interlock and restart interlock.
Interlock Function p.100
F3SJ
Workpiece
KM1
KM2
S1 S2
M
KM1
KM2
OUT
PLC
IN
KM3
+DC24V
0 V
E1
A1
B1
A2
B2
KM1 KM2
*: Output operation mode of auxiliary output 1 is "safety output information/reverse enabled" (initial setting)
F39-JC A-L F39-JC A-D
Emitter Receiver
- Auto reset mode
- Using external device monitoring function
Muting lamp
(external indicator)
Communication
line (+) (Grey)
Communication
line (-) (Pink)
Shield
0V (Blue)
Muting input 2 (Red)
T
est input (Green)
Reset input (Y
ellow)
Muting input 1 (White)
+24V (Brown) +24V (Brown)
External device monitoring input (Red)
Auxiliary output 1 (Y
ellow)
Safety
output 1 (Green)
Safety
output 2 (White)
0V (Blue)
Shield
S1 :External test switch
(connect to 0V if a switch is not required)
S2 :Lockout reset switch
(connect to 24V if a switch is not required)
KM1, KM2 :Safety relay with forcibly-guided contact (G7SA) or
magnetic contactor
KM3 :Solid state contactor (G3J)
M :3-phase motor
E1 :24VDC power supply (S82K)
PLC :Programmable controller
(Used for monitoring -- not related to safety system)
A1,B1,A2,B2 : Muting sensor (Retro-reflective photoelectric
sensor (E3Z-R81))
Unblocked
Blocked
Muting input 1
Muting input 2
F3SJ Safety output
A1 Safety output
B1 Safety output
A2 Safety output
B2 Safety output
KM1,KM2 N.O. contact
KM1,KM2 N.C. contact
PLC input (*)
PLC output
(PNP output)
Reflector
Muting sensor
Two-wire type sensor cannot be used.
Courtesy
of
CMA/Flodyne/Hydradyne
▪
Motion
Control
▪
Hydraulic
▪
Pneumatic
▪
Electrical
▪
Mechanical
▪
(800)
426-5480
▪
www.cmafh.com