1-6
1-5 Applicable Standards
1
Features and System Configuration
1-5 Applicable Standards
EC Directives
Note
To conform to the EMC Directives, the Servomotor and Servo Drive must be installed under
the conditions described in
4-3 Wiring Conforming to EMC Directives
.
UL/CSA Standards
The Servo Drives and Servomotors comply with UL 508C (file No. E179149) as long as the following
installation conditions 1 and 2 are met.
1. The Servo Drive must be used in a pollution degree 1 or 2 environment as defined in IEC 60664-
1 (example: installation in an IP54 control panel).
2. A UL-listed (with
mark) circuit breaker or UL-listed (with
mark) fuse must be connected
between the power supply and noise filter.
Refer to the following table for the rated current of the circuit breaker or fuse.
You must use copper wiring with a temperature rating of 60
°
C or higher.
Korean Radio Regulations (KC)
· SMARTSTEP2-series Servo Drives comply with the Korean Radio Regulations (KC).
· The G-series Servomotors do not comply with the Korean Radio Regulations (KC).
EC Directive
Product
Applicable standards
Comments
Low Voltage
Directive
AC Servo Drive
EN 61800-5-1
Safety requirements for electronic equipment for mea-
surement, control, or laboratory use
AC Servomotor
IEC 60034-1
Rotating electric machines
EMC
Directive
AC Servo Drive
EN 55011 class A
group1
Radio disturbance limits and measurement methods of
industrial, scientific, and medical radio-frequency
equipment
EN 61000-6-2
Electromagnetic compatibility (EMC): Immunity stan-
dard for industrial environments
Standard
Product
Applicable standards
File number
UL Standard
AC Servo Drive
UL 508C
E179149
AC Servomotor
UL1004-1
E331224
CSA standard
AC Servo Drive
CSA C22.2 No. 14
E179149
AC Servomotor
CSA C22.2 No. 100
E331224
Servo Drive model
Rated current of circuit breaker (A)
R7D-BPA5L
5
R7D-BP01L
5
R7D-BP02L
5
R7D-BP01H
5
R7D-BP02H
5
R7D-BP02HH
5
R7D-BP04H
10