Omron SCON-CA, Connection Manual

Page: 8 / 40

5
．
Applicable Devices and Device Configuration
5
5. Applicable Devices and Device Configuration
5.1. Applicable Devices
The applicable devices are as follows:
Manufacturer Name Model
OMRON NJ-series CPU Unit NJ501-[][][][]
NJ301-[][][][]
IAI SCON-CA Controller
SCON-CAL Controller SCON-CA-[]-EC-[]
SCON-CAL-[]-EC-[]
IAI Actuator -
Precautions for Correct Use
As applicable devices above, the devices with the models and versions listed in
Section 5.2.
are actually used in this document to describe the procedure for connecting devices and
checking the connection.
You cannot use devices with versions lower than the versions listed in
Section 5.2
.
To use the above devices with models not listed in
Section 5.2.
or versions higher than those
listed in
Section 5.2.
, check the differences in the specifications by referring to the manuals
before operating the devices.
Additional Information
This document describes the procedure to establish the network connection. It does not
provide information on operation, installation or wiring method which is not related to the
connection procedure. It also does not describe the functionality or operation of the devices.
Refer to the manuals or contact the device manufacturer.
(IAI Corporation http://www.intelligentactuator.com/)
This URL is the latest address at the time of this document creation. Contact each device
manufacturer for the latest information.
Additional Information
Contact IAI Corporation for actuators connectable to SCON-CA/SCON-CAL Controllers.