36
5
After you have confirmed an
appropriate operation, save the
project to the Controller.
Run the save command from the
Terminal tab page.
* The save command stores the
downloaded project in the
Controller. This operation saves
the settings to be executed
automatically when the power to
the Controller is turned on.
7. Appendix Saving and Loading a Project
The following describes the procedures to save a Power PMAC IDE project on the computer, and to
reuse it.
7.1. Saving a Project
1
Creating a Configuration File
Create a Configuration File to save
parameters you have changed.
Right-click
Configuration
in the Solution
Explorer pane, and select
Generate
Configuration File
.
A Configuration File is added to
Configuration
.
2
Enter a file name in the textbox, then click
the OK button.
