![background image](http://html1.mh-extra.com/html/omron/r88d-kn01h-ect-l/r88d-kn01h-ect-l_user-manual_744172547.webp)
A - 101
Appendices
G5-series Linear Motors/Servo Drives With Built-in EtherCAT Communications
A-3
S
y
smac Error Sta
tus
Cod
es
A
A-3
-1 Err
or T
able
3847 0000
hex
Interface
Input
Function
Number
Error 1
There is an undefined
number specification
in the input signal
(IN1, IN2, IN3, and
IN4) function
allocations. Or, a logic
setting error was
detected.
•
There is an undefined
number specification in the
input signal (IN1, IN2, IN3,
and IN4) function
allocations.
•
Different logic is set for the
same function in the
function assignments of
the input signals (IN1, IN2,
IN3, and IN4).
3
3848 0000
hex
Interface
Input
Function
Number
Error 2
There is an undefined
number specification
in the input signal
(IN5, IN6, IN7, and
IN8) function
allocations. Or, a logic
setting error was
detected.
•
There is an undefined
number specification in the
input signal (IN5, IN6, IN7,
and IN8) function
allocations.
•
Different logic is set for the
same function in the
function assignments of
the input signals (IN5, IN6,
IN7, and IN8).
3
3849 0000
hex
Interface
Output
Function
Number
Error 1
There is an undefined
number specification
in the output signal
(OUTM1) function
allocation.
There is an undefined
number specification in the
output signal (OUTM1)
function allocation.
3
384A 0000
hex
Interface
Output
Function
Number
Error 2
There is an undefined
number specification
in the output signal
(OUTM2) function
allocation.
There is an undefined
number specification in the
output signal (OUTM2)
function allocation.
3
384B 0000
hex
External
Latch Input
Allocation
Error
There is an error in the
latch input function
allocation.
•
The function was allocated
to input signals other than
IN5, IN6, or IN7.
•
A latch input is assigned to
an NC signal.
•
The same latch input is not
assigned to the same pin in
all Control Modes.
3
384C 0000
hex
Overrun Limit
Error
The motor exceeded
the allowable
operating range set in
the Overrun Limit
Setting (3514 hex)
with respect to the
position command
input range.
•
The gain or mass ratio is
not suitable.
•
The set value of the
Overrun Limit Setting
(3514 hex) is too small.
3
384F 0000
hex
Object Setting
Error 1
The electronic gear
ratio exceeded the
allowable range.
The electronic gear ratio
exceeded the allowable
range.
3
3850 0000
hex
Object Setting
Error 2
External encoder ratio
exceeded the
allowable range.
External encoder ratio
exceeded the allowable
range.
3
Event
code
Event name
Description
Assumed cause
Level
Reference
Maj
Prt
Min
Obs
Info