
A - 153
Appendices
AC Servomotors/Servo Drives 1S-series with Built-in EtherCAT® Communications User’s Manual (I586)
A-4 Sys
m
ac Error Sta
tus C
o
des
A
A-4
-2 Err
or De
scriptions
Event name
Drive Prohibition Input Error
Event code
64E30000 hex
Description
Both the Positive Drive Prohibition (POT) and the Negative Drive Prohibition Input (NOT) turned ON.
Source
EtherCAT Master Function Mod-
ule
Source details
Slave
Detection
timing
Continuously
Error
attributes
Level
Minor fault
Recovery
Error reset
(after resetting
slave errors)
Log category
System log
Effects
User program
Continues.
Operation
Power drive circuit is OFF
Indicators
EtherCAT NET RUN
EtherCAT NET ERR
EtherCAT LINK/ACT
---
---
---
System
-defined
variables
Variable
Data type
Name
None
None
None
Cause and
correction
Assumed cause
Correction
Prevention
An error occurred on the switch,
wire, power supply, and wiring
that were connected to the Posi-
tive Drive Prohibition (POT) or
Negative Drive Prohibition Input
(NOT)
Check and correct an error on the
switch, wire, power supply, and
wiring that were connected to the
Positive Drive Prohibition Input or
Negative Drive Prohibition Input.
Confirm that there are not discon-
nection and incorrect logic setting,
and use the Drive Prohibition
Input.
False detection occurred
because the control signal power
supply was turned ON slowly
Check whether the control signal
power supply (12 to 24 VDC) is
turned ON slowly, and adjust the
timing if it is slow.
Adjust the timing at which the con-
trol signal power supply is turned
ON so that the signal can be input
correctly.
Attached
information
None
Precautions/
Remarks
AL status code: -, Error No.: 3800 hex
Summary of Contents for R88D-1SN ECT Series
Page 973: ......