Omron R88D-1SN ECT Series, User Manual, Page: 746 / 974

12 Troubleshooting
12 - 14 AC Servomotors/Servo Drives 1S-series with Built-in EtherCAT® Communications User’s Manual (I586)
12-4 Information
Information is an event other than errors of which you are notified.
You can change information to errors by changing its level.
12-4-1 Related Objects
Index
(hex)
Subindex
(hex)
Name Description
Refer-
ence
4030 --- Information Customi-
zation Sets the information. P. 9-87
01 Information Level
Change Selection Sets the level change of information.
When a bit is set to 1, the level of the corresponding informa-
tion is set as the error.
Bit 0: STO P. 9-87
12-4-2 Information List
Error No.
Information name Warning condition
Information Level Change
Selection
*1
(4030-01 hex)
*1. For Information Level Change Selection , when a bit is set to 1 , the level of the corresponding information is set as the
error.
Main (hex) Sub (hex)
C0
*2
*2. When a level corresponds to the information, ST is displayed on the 7-segment LED. If you change the level of the cor-
responding information to an error, Er C0 00 will be displayed.
00 STO Detected STO status Bit 0