Omron R6YXC1000, User Manual, Page: 38 / 260

Safety Instr
uctions
S-26
7.5 KC mark
KC (Korean Certification) is a system based on the Korean Radio Law. Machineries designated with this system
are required to be registered as conformed certification or conformed registration, and to show KC marks.
Target products are prescribed by notification of the National Radio Research Agency (RRA).
7.5.1 EMC standards
■
Cautions regarding compliance with KC mark
The OMRON robot-series product is one component that is incorporated into the customer's system (built-in equipment).
We decide models by single robot product (controller, robot and peripheral device) and conform them to the EMC
standards.
This does not therefore guarantee that the OMRON robot-series product conforms to the EMC standards if only the robot
is used independently. The customer who incorporates OMRON robot products into the customer's final system, which
will be shipped to or used in Korea, should verify that the overall system conforms to the EMC standards.
■
KC mark
The OMRON robots (robots and controllers) are registered in the National Radio Research Agency (RRA) as conformed by
self-test and KC marks are affixed to the robots.
■
Related standards
• Electromagnetic Compatibility (EMC)
■
Information of conformity assessment
• Certification number list
Product Model name Certification number
Controller
YRC MSIP-REM-Y3M-X240
YRCX MSIP-REM-Y3M-X340
Robot
SCARA robots MSIP-REM-Y3M-YK
• Applicant and manufacturer : OMRON
7.5.2 Examples of EMC countermeasures
It is not necessary to take measures for ERCD and robots connecting to ERCD.
Examples of EMC countermeasures for single OMRON robot product are the same as those of CE marks.
Refer to countermeasures described in the related user's manual.
Furthermore, take proper countermeasures to conform customer's final system (overall system) to EMC
standards.