Omron R6YXC1000 User Manual Download Page 33 | Manualshive

Page: 33 / 260

Omron R6YXC1000 User Manual Download Page 33

Safety Instr

uctions

S-21

4.7 Disposal

When disposing of robots and related items, handle them carefully as industrial wastes. Use the correct
disposal method in compliance with your local regulations, or entrust disposal to a licensed industrial waste
disposal company.

1.

Disposal of lithium batteries

When disposing of lithium batteries, use the correct disposal method in compliance with your local regulations, or
entrust disposal to a licensed industrial waste disposal company. We do not collect and dispose of the used batteries.

2.

Disposal of packing boxes and materials

When disposing of packing boxes and materials, use the correct disposal method in compliance with your local regula-
tions. We do not collect and dispose of the used packing boxes and materials.

3.

Strong magnet

WARNING

Strong magnets are installed in the robot. Be careful when disposing of the robot.

See "6. Cautions regarding strong magnetic fields" for detailed information on strong magnetic fields.

«
...
31
32
33
34
35
...
»

Summary of Contents for R6YXC1000





































































































































































































































































Reviews:

No comments