![background image](http://html1.mh-extra.com/html/omron/q2v-series/q2v-series_technical-manual_743226618.webp)
618
SIEPCYEUOQ2V01A Q2V Technical Manual
■
15: OutFLowLimSel
Setting Value
Function
Description
15
OutFLowLimSel
Enters a signal to adjust the output frequency lower limit level as a percentage of the maximum output frequency.
■
16: Mot PTC Input
Setting Value
Function
Description
16
Mot PTC Input
Uses the motor Positive Temperature Coefficient (PTC) thermistor to prevent heat damage to the motor as a percentage of the
current value when the 10 V analog signal is input.
•
You can use the Positive Temperature Coefficient (PLC) thermistor as an auxiliary or alternative detection
function for
oL1 [Motor Overload]
problems to help prevent heat damage to motors. If the PTC input signal is
more than the overload alarm level,
oH3 [Motor Overheat (PTC Input)]
will flash on the keypad.
•
If the drive detects
oH3
, the motor stops with the method set in
L1-03
. If the drive detects
oH4
, the motor stops
with the method set in
L1-04
. If the drive incorrectly detects motor overheating problems, set
L1-05
.
■
30: Q2pack AI1
Setting Value
Function
Description
30
Q2pack AI1
Use with Q2pack. Refer to the Q2pack online manual for more information.
■
31: Q2pack AI2
Setting Value
Function
Description
31
Q2pack AI2
Use with Q2pack. Refer to the Q2pack online manual for more information.
◆
H4: ANALOG OUTPUTS
H4 parameters
set the drive analog monitors. These parameters select monitor parameters, adjust gain and bias,
and select output signal levels.
■
Calibrate Meters Connected to MFAO Terminal AO
Use these parameters to calibrate meters connected to terminal AO:
•
H4-02 [AO An.Out Gain]
•
H4-03 [AO An.Out Bias]
Set these parameters where the output voltage of 10 V and output current of 20 mA are 100% of the signal level.
Use jumper switch
S5
and parameter
H4-07 [AO Signal Level Select]
to set the voltage output and current output.
No.
Name
Range
Default
H4-02
AO An.Out Gain
-999.9 - +999.9%
100.0%
H4-03
AO An.Out Bias
-999.9 - +999.9%
0.0%
H4-07
AO Signal Level Select
1: 0 - 10 VDC
3: 4 - 20 mA
1
and
show the gain and bias.
V/f
OLV
OLV/PM
OLV/PM AOLV/PM
EZOLV
V/f
OLV
OLV/PM
OLV/PM AOLV/PM
EZOLV
V/f
OLV
OLV/PM
OLV/PM AOLV/PM
EZOLV
V/f
OLV
OLV/PM
OLV/PM AOLV/PM
EZOLV
Summary of Contents for Q2V Series
