![background image](http://html1.mh-extra.com/html/omron/q2v-series/q2v-series_technical-manual_743226237.webp)
SIEPCYEUOQ2V01A Q2V Technical Manual
237
Code
Name
Causes
Possible Solutions
The relay or contactor on the soft-charge bypass
relay is damaged.
U4-06 [SoftChgRelay Maint]
shows the performance life of the
soft-charge bypass relay. If
U4-06
is more than 90%, replace the
board or the drive. For information about replacing the board,
contact the manufacturer or your nearest sales representative.
Note:
•
The drive detects this error if the DC bus voltage decreases below the level set in
L2-05 [UV Detection Lvl (Uv1)]
while the drive is running.
•
The
Uv1
detection level is approximately 190 V for a 200 V class drives. The detection level is approximately 380 V for 400 V class drives. The detection level is
approximately 350 V when
E1-01 [Input AC Supply Voltage]
< 400.
•
Do a Fault Reset to clear the fault.
•
Fault trace is not available for this fault.
•
L5-08 [U/OV,OH,GF A-Reset Select]
disables the Auto Restart function.
Code
Name
Causes
Possible Solutions
Uv2
Control Power Undervoltage
The value set in
L2-02 [RideThrough Time@Power
Loss]
increased and the momentary power loss
recovery unit is not connected to the drive.
Connect the momentary power loss recovery unit to the drive.
There was a problem with the drive hardware.
•
Re-energize the drive.
•
If the fault stays, replace the control board or the drive. For
information about replacing the control board, contact the
manufacturer or your nearest sales representative.
Note:
•
The drive detects this error if the control power supply voltage decreases.
•
Do a Fault Reset to clear the fault.
•
Fault trace is not available for this fault.
Code
Name
Causes
Possible Solutions
Uv3
Soft Charge Answerback Fault
The relay or contactor on the soft-charge bypass
relay is damaged.
•
Re-energize the drive.
•
If the fault stays, replace the control board or the drive.
•
Check monitor
U4-06 [SoftChgRelay Maint]
shows the
performance life of the soft-charge bypass relay. If
U4-06
is
more than 90%, replace the board or the drive. For information
about replacing the control board, contact the manufacturer or
your nearest sales representative.
Note:
•
Do a Fault Reset to clear the fault.
•
Fault trace is not available for these faults.
Summary of Contents for Q2V Series
