Omron NYP17-*-11 SERIES, User Manual

Page: 247 / 264

A-1-6
BIOS - Security
Provides security information like BIOS Password and HDD information.
WARNING
Security setting adjustments should only be performed by the engineer
in charge that possesses a thorough understanding of the security set-
tings. Selecting non-recommended security settings can put your sys-
tem at risk.
Changeable BIOS Security parameters and their factory default values:
Item Default / Remark
BIOS Password Empty
BIOS Lock Enabled
HDD Security
Configuration Diskname Display disk parameters
Secure Boot Menu Secure Boot Disabled
Secure Boot Mode Custom
Key Management Default Key Provision Disabled
Platform Key (PK) NOT INSTALLED
Key Exchange Key (KEK) NOT INSTALLED
Authorized Signatures NOT INSTALLED
Forbidden Signatures NOT INSTALLED
Authorized TimeStamps NOT INSTALLED
A-1-7 BIOS - Save & Exit
Provides the possibility to leave the BIOS with or without saving changes.
Save & Exit Parameters: Disabled .
• Save Changes and Exit
Changed settings are saved and the Operating System starts with the changed settings.
• Discard Changes and Exit
Changed settings are not saved and the Operating System starts with the unchanged settings.
• Save Changes and Reset
Changed settings are saved and the Panel PC restarts using the changed settings.
• Discard Changes and Reset
Changed settings are not saved and the Panel PC restarts with the unchanged settings.
• Save Changes
Changed settings are saved and the BIOS setup stays open.
• Discard Changes
Changed settings are reverted to their last saved values and the BIOS setup stays open.
• Restore Defaults
Revert all BIOS settings to factory default.
Appendices
A - 11
NY-series Industrial Panel PC User's Manual (W555)
A-1 BIOS
A
A-1-6 BIOS - Security