Omron NYP - 1 Series, Hardware User Manual

Page: 124 / 266

5-2 Install Options
This section describes the installable options for the Industrial Panel PC.
5-2-1
Install a Drive
A drive is a storage device for the Industrial Panel PC.
Additional Information
• Depending on the product configuration 0, 1 or 2 drives can be pre-installed.
Refer to 1-4 Product Configuration Panel PC on page 1-5 for details.
• Depending on the CPU type one or two drives are supported.
Refer to 4-1-5 CPU Specifications on page 4-9 for the number of supported drives.
• Refer to 3-10-4 HDD and SSD Storage Devices on page 3-26 for the recommended drive
models.
• Refer to 4-1-7 Storage Device Specifications on page 4-14 for drive specifications.
Prepare the following items:
• The drive
A drive is not supplied with the Panel PC.
• The drive bracket with mounting screws
These are supplied with the Panel PC.
To install a drive:
1
Ensure the Panel PC is OFF.
2
Remove the drive cover.
1
3
2
1) Push the lock lever
1
.
2) Tilt the drive cover
2
.
3) Remove the drive cover
3
.
5 Installation
5-4
NY-series Industrial Panel PC Hardware User's Manual (W555)