background image

5-7

Install Software

This section describes how to install the software for the Industrial Box PC.

5-7-1

Internet Browser

Depending on the operating system an Internet Browser is preinstalled.
• For Windows 10 the standard Internet Browser is installed.
• For Windows 7 an executable file for browser installation is provided in the user data partition of the

drive. For Windows 7 use the procedure below to perform the browser installation.

Additional Information

• Check the IT policy of your company for available software and for details on the software

environment the Industrial Box PC will operate in.

• Install all updates and ensure the browser stays up-to-date.

To install the available Internet Browser in a Windows 7 operating system:

1

Use Windows Explorer to examine the contents of the user data partition mapped as drive let-
ter D:.

2

Open the Installer folder (D:\OMRON-NY\Installers) and locate the Internet Explorer installer
files.

3

Select the installer suitable for your system (32/64 bits) and language (English/Japanese).

4

Ensure there is a connection to the Internet.

5

Launch the installer to begin the installation process.

6

Follow the installer steps to complete the browser installation.

7

Download and install the latest updates via Windows Update.

The Internet Browser is installed in Windows 7.

5 Installation

5 - 48

NY-series Industrial Box PC User's Manual (W553)

Summary of Contents for NYB17-11





















































































































































































































































Reviews: