Omron NYB17-*100 SERIES, User Manual

Page: 153 / 194

6-2 Power OFF
This section provides Power OFF details.
Before following power OFF procedures below, check that the Box PC Without Operating System is
ON by examining the LED indicators on the Box PC.
6-2-1
Power OFF Using the Operating System Shut Down
1
Ensure all programs are closed.
If required close all active programs.
2
Select Shut down of the Operating System.
The Box PC will shut down.
3
Wait until the PWR LED is OFF.
The Box PC is powered OFF.
6-2-2
Power OFF Using the Power Button
1
Ensure all programs are closed.
If required close all active programs.
2
Press and release the power button on the Box PC Without Operating System within 1 second.
The Box PC Without Operating System will shutdown.
Note that this behaviour of can be reconfigured with the Power Options settings.
Refer to
2-3 Power Button on page 2 - 8 for power button location information.
3
Wait until the PWR LED is OFF.
The Box PC is powered OFF.
Additional Information
The Box PC will restart automatically if a UPS is connected to the I/O connector of the Box PC.
Use the Power button of the UPS or remove the input power from the UPS for a normal shut-
down of the Box PC.
6 Operating Procedures
6 - 3
NY-series Industrial Box PC Without Operating System User's Manual (W586)
6-2 Power OFF
6
6-2-1 Power OFF Using the Operating System Shut Down