Omron NYB17-*100 SERIES, User Manual

Page: 135 / 194

5-4-4
Wire the I/O Connector
This section describes how to wire the I/O connector.
I/O Connector Wiring Materials
Use the supplied I/O connector to connect the inputs and outputs to the Box PC Without Operating
System.
Recommended I/O conductor sizes for the connector are provided in the table.
Wire type Conductor cross-section
Solid conductor
0.2 to 1.5 mm
2
Flexible conductor
Flexible conductor, with ferrule and no plastic sleeve
0.25 to 1.5 mm
2
Flexible conductor, with ferrule and plastic sleeve
0.25 to 0.75 mm
2
Minimum AWG according to UL/cUL 24
Maximum AWG according to UL/cUL 16
I/O Connections
This section describes I/O connection details.
1
3
5
2
4
6
Pin Description Internal Circuit Details
1 Power Status Output The Power Status Output has an internal relay. Wire this
according to the input device connected to the Power Sta-
tus Output.
2
5 Installation
5 - 39
NY-series Industrial Box PC Without Operating System User's Manual (W586)
5-4
W
ire
5
5-4-4 Wire the I/O Connector