Omron NY532-1*00-111*13**0, User Manual, Page: 94 / 214

4-2 Connector Specifications
This section provides the Connector Specifications of the IPC Machine Controller.
4-2-1
Power Connector Specifications
The power supply connector can be locked to prevent unintentional disconnection.
The connector can only be inserted the correct way.
The connector is a Phoenix Contact type SPC5/2-STCL-7.62 BK (1711708).
The Panel PC provides protection against reverse polarity.
2 1
The pin layout represents the power connector on the Panel PC.
Pin Description
1 24 VDC
2 0 VDC
Item Specifications
Conductor isolation rating 90°C
Termination rating 90°C
Additional Information
• Refer to 5-4-3 Wire the Power Connector on page 5 - 33 for wiring details.
• Refer to 5-4-2 Ground on page 5 - 27 for grounding details.
4 Specifications
4 - 8
NY-series Industrial Panel PC Hardware User's Manual (W557)