![background image](http://html1.mh-extra.com/html/omron/ny532-1-00-111-13-0/ny532-1-00-111-13-0_user-manual_743137148.webp)
5-4-4
Wire the I/O Connector
This section describes how to wire the I/O connector.
I/O Connector Wiring Materials
Use the supplied I/O connector to connect the inputs and outputs to the IPC Machine Controller.
Recommended I/O conductor sizes for the connector are provided in the table.
Wire type
Conductor cross-section
Solid conductor
0.2 to 1.5 mm
2
Flexible conductor
Flexible conductor, with ferrule and no plastic sleeve
0.25 to 1.5 mm
2
Flexible conductor, with ferrule and plastic sleeve
0.25 to 0.75 mm
2
Minimum AWG according to UL/cUL
24
Maximum AWG according to UL/cUL
16
I/O Connections
This section describes I/O connection details.
1
3
5
2
4
6
Pin
Description
Internal Circuit Details
1
Power Status Output
The Power Status Output has an internal relay. Wire this
according to the input device connected to the Power Sta-
tus Output.
2
5 Installation
5 - 36
NY-series Industrial Panel PC Hardware User's Manual (W557)
Summary of Contents for NY532-1*00-111*13**0
