Omron NX701-1620, User Manual

Page: 81 / 168

3 - 9
3 Configuration Units
NX-series CPU Unit Hardware User’s Manual (W535)
3-1 C
P
U
Unit
s
3
3-
1-2 Par
t Names and F
unctions
You can check the followings in the ID information indications on the right side of the CPU Unit.
ID Information Indication
Letter Name Function
A Lot number and serial
number Shows the lot number and the serial number of the CPU Unit.
DDMYY: Lot number,

: For use by OMRON, xxxx: Serial number
M is 1 to 9 for January to September, X for October, Y for November, and Z
for December.
B Unit version Shows the unit version of the CPU Unit.
C MAC addresses Shows the MAC addresses of the built-in EtherNet/IP ports on the CPU Unit.
D
Hardware revision
Shows the hardware revision of the CPU Unit.
*1
*1. The hardware revision is not displayed for the Unit that the hardware revision is in blank.
LOT No. DDMYY xxxx Ver.1.
PORT1 : HW Rev.
PORT2 :
(A) (B)
(C) (D)