Omron NX701-1620, User Manual

Page: 158 / 168

Appendices
A - 2 NX-series CPU Unit Hardware User’s Manual (W535)
A-1 Specifications
This section gives the specifications of the NX-series CPU Units.
Item NX7-

Enclosure Mounted in a panel
Grounding method Ground to less than 100 Ω .
Dimensions (height × depth × width) 100 mm × 100 mm × 132 mm
Weight 880 g (including the End Cover)
Current consumption 40 W (including SD Memory Card and End Cover)
Operating
environment
Ambient operating tempera-
ture 0 to 55°C
Ambient operating humidity 10% to 95% (with no condensation)
Atmosphere Must be free from corrosive gases.
Ambient storage tempera-
ture -25 to 70°C (excluding battery and Fan Unit)
Altitude 2,000 m max.
Pollution degree 2 or less: Meets IEC 61010-2-201.
Noise immunity 2 kV on power supply line (Conforms to IEC 61000-4-4.)
Overvoltage category Category II: Meets IEC 61010-2-201.
EMC immunity level Zone B
Vibration resistance
Conforms to IEC 60068-2-6.
5 to 8.4 Hz with 3.5-mm amplitude, 8.4 to 150 Hz, acceleration
of 9.8 m/s
2
100 min each in X, Y, and Z directions (10 sweeps of 10 min
each = 100 min total)
Shock resistance
Conforms to IEC 60068-2-27.
147 m/s
2
, 3 times in X, Y, and Z directions
Battery
Life 2.5 years (at 25°C, Power ON time rate 0% (power OFF))
Model CJ1W-BAT01
Applicable
standards
*1
*1. Refer to the OMRON website (http://www.ia.omron.com/) or consult your OMRON representative for the most
recent applicable standards for each model.
EU Directives EN61131-2
cULus Listed UL508 and ANSI/ISA 12.12.01
Shipbuilding Standards NK, LR
Other than the above. KC