1-5
Memory Used for CJ-series Units
The following describes how to set the memory used for the CJ-series Units and the area types of the
compatible memory used for CJ-series Units.
1-5-1
Setting for the Memory Used for CJ-series Units
For The NX701-
££
20 and NX102 CPU Unit, the memory used for CJ-series Units can be set using
the Multiview Explorer of the Sysmac Studio.
Select
Configurations and Setup
-
Controller Setup
, and then use
Memory Settings
to set the area
type and each address range of the memory used for CJ-series Units.
For details, refer to
Sysmac Studio Version 1 Operation Manual (Cat. No. W504)
.
1-5-2
Compatible Memory for CJ-series Units
NX701-
££
20 and NX102 CPU Units are compatible with the following area types of the memory used
for CJ-series Units.
• CIO Area
• Work Area
• Holding Area
• Data Memory Area
• Expansion Memory Area
For details about the specifications of memory for the CJ Units, refer to
NJ/NX-series CPU Unit
Software User's Manual (Cat. No. W501)
.
1 FINS
1 - 6
NX-series CPU Unit FINS Function User's Manual (W596)
Summary of Contents for NX102-10 Series
