Omron NX102-10 Series, User Manual

Page: 18 / 68


For NX102
The ID information on an NX-series NX102- ££££ CPU Unit is shown below.
ID Information Indication
Unit version Hardware revision Lot number Serial number
MAC address
LOT No. DDMYY £ xxxx
PORT1 ££££££££££££
PORT2 ££££££££££££
Ver. £ . ££ HW Rev. £
Note The hardware revision is not displayed for the Unit whose hardware revision is blank.
Checking Unit Versions with the Sysmac Studio
You can use the Sysmac Studio to check unit versions. The procedure is different for Units and for
EtherCAT slaves.

Checking the Unit Version of an NX-series CPU Unit
You can use the Production Information while the Sysmac Studio is online to check the unit version
of a Unit. You can do this for the following Units.
Model Unit for which unit version can be checked
NX701-
££££
CPU Unit
NX102-
££££
CPU Unit and NX Unit on CPU Rack
NX1P2-
££££
CPU Unit, NX Unit on CPU Rack, and Option Boards
1
Right-click CPU Rack under Configurations and Setup - CPU/Expansion Racks in the Multi-
view Explorer and select Production Information .
The Production Information Dialog Box is displayed.

Changing Information Displayed in Production Information Dialog Box
1
Click the Show Detail or Show Outline Button at the lower right of the Production Information
Dialog Box.
The view will change between the production information details and outline.
Versions
16
NX-series CPU Unit FINS Function User's Manual (W596)