![background image](http://html1.mh-extra.com/html/omron/nx-sl-series/nx-sl-series_instruction-and-reference-manual_742411050.webp)
2 Standard Functions
2 - 16
NX-series Safety Control Unit Instructions Reference Manual (Z931)
BYTE_TO_INT
This function converts a BYTE variable to an INT variable.
If you omit an input or output parameter, a building error will occur.
This function converts BYTE data
In
to INT data
Out
.
To convert INT data to BYTE data, refer to INT_TO_BYTE.
• The input condition depends on whether the output is safety data or standard data. If the condition is
not met, a building error will occur.
• If you set a safety data type variable for the output terminal, set a safety data type variable for the
input terminal as well.
• If you set a standard data type variable for the output terminal, you can set either a safety data type
variable or a standard data type variable for the input terminal.
Instruction
Name
FB/FUN
Graphic expression
BYTE_TO_INT
Convert BYTE to
INT
FUN
Variables
Name
I/O
Description
Valid range
Default
In
Data to con-
vert
Input
Data to con-
vert
BYTE#16#00 to FF
BYTE#16#00
Out
Conversion
result
Output
Conversion
result
INT#0 to 255
INT#0
Boolean
Bit strings
Integers
Durations
BOOL
SAFEBOOL
BYTE
SAFEBYTE
WO
RD
SAFEWORD
DWORD
SAFEDWORD
INT
SAFEINT
DINT
SAFEDINT
TI
ME
SAFETIME
In
OK
OK
Out
OK
OK
Function
Additional Information
Precautions for Correct Use
BYTE_TO_INT
Summary of Contents for NX-SL series
