Omron NX-ILM400, User Manual

Page: 65 / 176

4 - 7
4 Installation and Wiring
NX-series IO-Link Master Unit User’s Manual (W567)
4-1 Inst
allin
g NX U
n
it
s
4
4-
1-4 Inst
allation
Or
ient
ation
Precautions for Correct Use
• When removing an NX Unit, remove multiple Units together which include the one you want
to remove. If you attempt to remove only one Unit, it is stuck and hard to pull out.
• Do not unlock the DIN track mounting hooks on all of the NX Units at the same time. If you
unlock the DIN Track mounting hooks on all of the NX Units at the same time, all of the Units
may come off.
This section describes the installation orientation for each type of Unit that an NX Unit can be con-
nected to.
The NX Unit can be installed only in the upright orientation.
For some NX Units, the specifications are restricted.
For detailed restrictions, refer to the user’s manuals for the NX Units and System Units that you will
use.
Orientation is possible in the following six directions.
(A) is the upright orientation and (B) to (F) are other orientations.
4-1-4 Installation Orientation
Installation Orientation on the CPU Unit
Installation Orientation on Slave Terminals
Up
Down
(A)
(B)
(E)
Upper
Lower
(C)
(F)
(D)