Omron NX-ILM400, User Manual

Page: 162 / 176

Appendices
A - 36 NX-series IO-Link Master Unit User’s Manual (W567)
A-5 Version Information with CPU Units
This section provides the version-related information when connecting Units to a CPU Unit. It describes
the relationships between the unit versions of each Unit and the CPU Unit, versions of the Sysmac
Studio and CX-ConfiguratorFDT, and specification changes for each unit version of each Unit.
The relationship between the unit versions of each Unit and CPU Unit, and versions of the Sysmac
Studio and CX-ConfiguratorFDT are shown below.
The items that are used in the version combination tables are given below.
Refer to the user's manual for the CPU Unit for the models of CPU Unit to which NX Units can be
connected.
• With the combinations of the unit versions/versions shown below, you can use the functions that are
supported by the unit version of the Unit model. Use the unit versions/versions (or the later/higher
unit versions/versions) that correspond to the NX Unit models and the unit versions. You cannot use
the specifications that were added or changed for the relevant NX Unit models and the unit versions
unless you use the corresponding unit versions/versions.
• Depending on the type and model of the Unit to which the NX Unit is connected, some Units do not
have the corresponding versions given in the table. If a Unit does not have the specified version, sup-
port is provided by the oldest available version after the specified version. Refer to the user’ s manu-
als for the specific Units for the relation between models and versions.
• If you use the corresponding unit versions/versions given in the following table or later/higher ver-
sions, refer to the version information on the CPU Unit.
The following table shows the relationships between the unit versions/versions of the NX Units and
CPU Units, Sysmac Studio, and CX-ConfiguratorFDT for changes in or additions to the functions.
A-5-1 Relationship between Unit Versions of Units
Interpreting the Version Combination Tables
NX Unit Corresponding unit version/version
Model Unit version CPU Unit Sysmac Studio
CX-Configura-
tiorFDT
Model numbers of NX
Units. Unit versions of
NX Units. Unit versions of the
CPU that are compat-
ible with the NX
Units. Sysmac Studio ver-
sions that are com-
patible with the NX
Units and CPU Unit. The version of the
CX-ConfiguratorFDT
that supports the
IO-Link Master Unit.
Version Combination Tables
NX Unit Corresponding unit version/version
Model Unit version CPU Unit Sysmac Studio CX-ConfiguratorFDT
NX-ILM400 Ver.1.0 Ver.1.13 Ver.1.17 Ver.2.3
Ver.1.1 Ver.1.20
A-5-2 Functions That Were Added or Changed for Each Unit Version