![background image](http://html1.mh-extra.com/html/omron/nx-ec0112/nx-ec0112_user-manual_742777155.webp)
6 - 29
6 Incremental Encoder Input Units
NX-series Position Interface Units User’s Manual (W524)
6-6 I/O Refreshin
g Metho
d
Setting
6
6-
6-5 Dif
ferences in
I/O R
efreshi
n
g Methods Base
d on the Co
ntroller
Use the following procedure to select
Enabled (DC with priority in cycle time)
from the
Enable Distrib-
uted Clock
setting for the EtherCAT Coupler Unit and use task period prioritized refreshing for Incre-
mental Encoder Input Units connected to an EtherCAT Coupler Unit.
1
Double-click
EtherCAT
in the Multiview Explorer.
The following tab page is displayed.
2
Click the EtherCAT Coupler Unit under
Configurations and Setup
.
Change the
Enable Distributed Clock
setting to
Enabled (DC with priority in cycle time)
.
As a result, task period prioritized refreshing is used.
The type of controller that is connected affects the I/O refreshing method, parameter settings, data
access methods, and supported functions.
This section describes this information for various controllers.
Setting with the Sysmac Studio
6-6-5
Differences in I/O Refreshing Methods Based on the Controller
Summary of Contents for NX-EC0112
