44
LD Cart Transporter User's Manual
14766-000 Rev H
3.4 Setting Up an LD Platform Cart Transporter
Removing the Crate Braces
1. Remove the top brace by releasing the four spring-loaded latches, two on either side of
the brace.
2. Remove the front brace by releasing the two spring-loaded latches, one on either side of
the brace.
Figure 3-6. Crate Braces
Repacking for Relocation
If the LD Platform Cart Transporter or other equipment needs to be relocated, reverse the steps
in the installation procedures in this chapter. Reuse the original packing crates and materials
and follow all safety notes used for installation. Improper packing for shipment will void your
warranty.
The LD Platform Cart Transporter must always be shipped in an upright orientation.
3.4 Setting Up an LD Platform Cart Transporter
The LD Platform Cart Transporter is shipped with the HMI post installed. This includes the
Operator panel at the top of the HMI post. You will have to:
l
Roll the transporter off of the crate, down the ramp
This will be rolling on the casters, not the drive wheels.
l
Remove the pins holding the drive wheels up
l
Install the battery
l
Install the dock, for charging the transporter‘s battery
This should have already been removed from the crate.
l
Set up your wireless system
This is covered in Settings and Configuration on page 63.
