24
1.
Overview of the unit
1.7 Mode configuration
This model has three modes: measuring mode, setting mode, and communication setting mode.
– Measuring mode: The measured values for each circuit are displayed.
– Setting mode: By operating keys on the body of the unit you can change settings for each of the circuits, and
make common settings for communications, output, the display, etc.
– Communication setting mode: Make settings on the units using RS-485 communication.
• In the measuring mode and setting mode, the circuit B to D items are displayed by switching the enable/disable
settings for each of the circuits to "ON" (enabled). (The circuits indicated inside the dotted lines in the above
diagram are "OFF" (disabled) in the default state.)
MODE
MODE
MODE
Start
Circuit A
Measured
value
Circuit B
Measured
value
Circuit C
Measured
value
Circuit D
Measured
value
Measuring
mode
Setting mode
Communication
setting mode
Press
and
hold
Circuit A
Setting
item
Circuit B
Setting
item
Circuit C
Setting
item
Circuit D
Setting
item
Common
Setting
item
Others
Setting
item
Command
Change settings from
host device using RS-
485 communication.
Password input
Command
